Resource Book for MRP Cascade training - RMSA Subject Teachers Forum - IT for Change

Understanding the Resource Prototype

Concept Map

Why do we do Concept/Mind Mapping

Lateral thinking is solving problems through a non-hierarchical and creative approach, using reasoning that does not follow any particular hierarchy or sequence and involving ideas that may not be obtainable by using only traditional step-by-step logic. This also enables the teacher to make new connections within the subject and across subjects.

Vertical thinking is a type of approach to problems that usually involves one being selective, analytical, and sequential. It could be said that it is the opposite of lateral thinking. This is the type of thinking we have been following in our teaching/learning processes.

We are now in a digital world which has made large amount of information available to us through the Internet. Therefore there is a need for us to be able to process connect and make meaning of large amounts of information. Hence we need to start thinking laterally rather than vertically.

Mind mapping is a highly effective way of getting information in and out of your brain and to enable lateral thinking. Mind mapping is a creative and logical means of mapping out ideas based on a central theme.

The five essential characteristics of Mind Mapping:

• File:Resource Book for MRP Cascade training html m43240de1.pngThe main idea, subject or focus is made clear in a central image.
• The main themes radiate from the central image as 'branches'.
• The branches comprise a key image or key word drawn or printed on its associated line.
• Topics of lesser importance are represented as 'twigs' of the relevant branch.
• The branches form a connected nodal structure.
• Possible to get into details without losing sight of the overall picture While a mind map may have only one central theme, concept maps may have many interrelated main themes. Concept maps are tools for organizing and representing knowledge. They include concepts, usually enclosed in circles or boxes of some type, and relationships between concepts or propositions, indicated by a connecting line between two

2 Computer Literacy

2.1 What is public Software

As our society becomes more and more digital, software, which is the 'building brick' of the digital society, becomes necessary for all. Basic software that is necessary for participating in the digital society needs to be provided to everyone as an universal right and entitlement should be seen as publicly owned software or Public software. As in the case of public education or public health, public institutions/ Governments are responsible to ensure that publicly owned software is available. This would ensure universal access to public software and also support public participation in its creation and sharing.

Just like government schools are open to all without discrimination (not necessary for private schools have many restrictions like fees, parents background etc. ), public software is accessible to all without discrimination while private software (also called proprietary software) has restrictions where the user has to buy a license to only use and cannot modify or share the software. Also just like community has right to participate in government schools (limited rights for parents in private schools) most public software is community created (while in case of private software, the vendor retains the important ownership rights).

Software required by all includes operating system, text / image / audio / video editors, email, web browser, search engine etc. Public software needs to be free software, providing the freedom to use, study, modify and share, to ensure universal access as well as participation in its creation and modification.

See [[1]] for a list of public software applications for general use of all and also another list of public educational software tools for teachers.

2.2 What is GNU/Linux?

GNU Linux is a free and open source operating system software and hence is public software. Since the operating system is the basic software that “runs your computer”, it needs to be available freely to all, to ensure universal access. Free Software users always have the freedom to share software, without restrictions. On a technical level, Free Software guarantees the right to view and also modify source code, or even use it as a basis to make a new program. This has enabled Kannadigas to make Kannada version of Ubuntu GNU/Linux system for benefit of Kannadigas.

2.3 What is Ubuntu?

Ubuntu is a version of the GNU/Linux operating system. Ubuntu is a thoroughly modern operating system that provides you might find in Windows or Macintosh OS X, but without the drawbacks. It is quite simple, yet offers sophisticated features.

Hardware support is excellent, with virtually every item of day-to-day hardware supported, including graphics/sound cards, printers, wireless, USB memory sticks, cameras, iPods, and so-on. There’s no need to fumble around with driver CD : practically everything will be up and running straight after installation, although as with any operating system you may have to configure the system to your own needs. Ubuntu provides free upgrades every six months (april and october) which means frequent improvements in its features.

2.4 How to use Ubuntu

Logging in :

The first thing you’ll see, after the computer has finished its self-testing, is a boot menu. This lets you choose between Ubuntu and Windows. The next thing you will see, after Ubuntu has finished the first stage of booting, is the login screen. Simply click on your username, type the password and hit Enter. Assuming both details are correct, booting will finish, and the desktop will appear.

The Desktop Layout

Panels : The two panels are visible —one at the top of the screen, and one at the bottom. The one at the top is concerned with presenting information, starting programs, and configuring the system.

The panel at the bottom is where programs minimize to, and this panel also includes a Show Desktop button (left), a trash icon (right), and a virtual desktop selector (right; of which more later). Files can be dragged and dropped onto the trash icon, and clicking it lets you view and empty the trash contents.

File:Resource Book for MRP Cascade training html m1fe6e117.pngMain menus

The three menus at the top of the screen (Applications, Places, System) are known as the main menus. They stay on-screen all the time. When an application starts, its own menus appear within its program window beneath.

The Applications menu at the top left provides access to software installed on the system.

The Places menu, alongside it, offers quick access to locations within the file system, or attached storage such as USB memory sticks. Digital cameras and MP3 players are also listed here when plugged-in.

The System menu, alongside the Places menu, offers control over your computer’s settings. It has two sub-menus, as follows:

Preferences: This menu mostly lets you tweak settings relating to your particular user account and the operation of the desktop. You can also alter some hardware settings, such as the screen resolution, but only those that relate to your personal desktop configuration.

Administration''': This menu offers system-wide hardware configuration options, such as altering the time/date, and options for configuring the underlying Ubuntu system, such as adding/removing software.

Rebooting and shutting down

To shut-down or reboot the computer, click the Shut Down entry on the System menu (under Ubuntu 12.04, select the Quit entry). Then select the relevant option from the dialog box that appears.

2.4.1 Managing Files and Folders

Files

File:Resource Book for MRP Cascade training html 712a04ef.pngFiles are the most basic unit of data that users can store on a disk. Every program, image, video, song, and document is stored as a file.

Folder

A folder is a collection of multiple files. Folders can also store other folders called sub-folders. Folders are also called "directories"

File system

A file system is a method of storing and organizing computer files and their data.

File Manager or File Browser

A file manager or file browser is a computer program that provides a user interface to work with file systems. The most common operations used are create, open, edit, view, print, play, rename, move, copy, delete, etc . Files are typically displayed in a hierarchy. Ubuntu uses a file manager/browser called Nautilus. File browser is used to

• Create folders and documents
• Display your files and folders

• Search and manage your files

This file manager lets you organize your files into folders. Folders can contain files and may also contain other folders. Using folders can help you find your files more easily.

File browser also manages the desktop. The desktop lies behind all other visible items on your screen. The desktop is an active component of the way you use your computer.

Every user has a Home Folder. The Home Folder contains all of the user's files. The desktop is another folder. The desktop contains special icons allowing easy access to the users Home Folder, Trash, and also removable media such as floppy disks, CDs and USB flashdrives.

File browser is always running. To open a new File browser window(see previous figure), double-click on an appropriate icon on the desktop such as Home or Computer, or choose an item from on the top panel.

In Ubuntu, many things are files, such as word processor documents, spreadsheets, photos, movies, and music.

Lets see how to create a new folder in our home folder and save a text file in it.

Step 1: Click on places → home folder

The file browser will open.

Step 2: On the menu bar, Click on New → Create Folder, You'll see a new folder with untitled 'folder as its name, you can overwrite it with any folder name that you want and press enter. This will create a new folder in your home directory

Step 3: Now, double-click on this new folder, it will open the new folder. On the menu bar, Click on New → Create Document → Empty file. You'll see a new file with new file as its name, you can overwrite it with any file name that you want and press enter. Double-click on the file and you can edit the text in the same.

2.4.2 How to Connect external devices

2.4.2.1 Connecting the Printer

1. File:Resource Book for MRP Cascade training html 3976403.pngClick on the power button
2. Select Printers
3. Make sure you have connected the printer to your system.
4. Click on the Add button and follow the instructions.

PS: The Displays and Printers options are also available when you click on Applications → System Tools → System Settings or by clicking on the power button and selecting System SettingsPrinter

2.4.2.2 Connecting to ProjectorsClick on the power button

1. Select Displays
2. In the window that opens, you will see the connected displays. To see the same thing in the monitor and the projector screen, click on the Mirror display check box.
3. If the configuration looks fine (display is fine on both screens), Click on the Apply button. Select the Keep this configuration option when asked for.

2.4.2.3 Pen Drive

To make the pen drive work:

• Connect the pen drive to the USB port.
• Go to Ubuntu Menu Places > Home Folder
• You can access the pen drive from here

2.4.2.4 Burning a CD/DVD

To Burn a DVD/CD:

• Go to Ubuntu Menu Applications > Sound and Video > K3b
• Follow instructions from here to create Data/Audio or Video CD/DVD.
• You must have a CD/DVD Writer on your computer.

2.5 To install a new software in Edubuntu 12.04

Edubuntu 12.04 uses Ubuntu software center (an application to install and manage software) instead of traditional synaptic package manager (Page 12 of your module describes the use of Synaptic package manager which is used in the older versions of Ubuntu and Edubuntu).

Click on Applications -> Ubuntu Software Center

In the search box (on the top right corner of the window), Enter the name of the application and press enter. In the list click on the required application and then on the install button.

2.6 Open Office

OpenOffice (same as LibreOffice) is a public software useful for making documents, spreadsheets and presentation files. OpenOffice Writer is very similar to MS Word. OpenOffice Calc is similar to Excel. OpenOffice Impress is like MS Powerpoint. OpenOffice works on both Windows and Ubuntu.

Using OpenOffice writer, you can type reports, documents, edit them, format them well and save them in many document formats - .odt, .html, .doc (.xls, .ppt) , .docx (.xlsx, .pptx) etc. It also has an 'export to PDF' option for making PDF document with a single click.

Department of Information Technology, Government of India has recommended the ODF format used in OpenOffice/LibreOffice as the standard for documents used in government.

2.6.1 Activity 1

Purpose

To write a document using Open Office Writer

Process

1. File:Resource Book for MRP Cascade training html 279ff2d9.pngSelect Application > Office > OpenOffice.org Word Processor
2. Type the following Passage into the Open Office Writer {| border="1" |- | What is Public Software Software developed for public service, and especially in government, has a unique context and objectives deriving from those of public service; with its imperative of providing public goods and ensuring equity and social justice. |}
3. You can try the following option to format the text
   1. Bold the heading
   2. Make the heading centred
5. Select Menu Option File > Save As to save the file, name the file About-Public-Software
6. A file called About-Public-Software.odt will be created in your folder Documents.

2.6.2 Activity 2

Purpose

To create a table in Open Office Word Processor

Process

1. Select Application > Office > OpenOffice.org Word Processor
2. Select Menu Option File > Open (Ctrl +O)
3. Open File About-Public Software.odt
4. File:Resource Book for MRP Cascade training html m2a6f49db.pngSelect Menu Option Table > Insert >Table
5. Insert a Table
6. Select Columns = 3 Rows = 5 and Press Okay
7. Enter the following data from the table below
8. Save the file.

This is how the table will look.

Questions About Public Software	Number of Participants who are aware	Number of People not aware
What is Public Software	15	5
What is Open Office	12	8
What is Ubuntu	6	14
What is Computer Aided Learning	4	16

2.6.3 Peer review using OpenOffice

For peer review of our resources, it is very useful to use the 'record changes' in OpenOffice. This helps us to make changes in a document and also the changes can be automatically accepted WITHOUT retyping the corrections. It saves a lot of time and also becomes a digital record of peer review.

File:Resource Book for MRP Cascade training html m49374103.pngTo record changes, click on 'Edit – Changes' and check / tick the Record option. The Show option should also be checked/ticked

Now any correction or change or deletion in the document will be shown separately in colour. The editor can make all changes in this way. More than one person can make changes to same document. The name of the editor will be shown when we move the cursor over the change.

When the author receives the document, she can 'accept' or 'reject' each change by right-clicking on the change. To accept all changes, author can click on 'Edit – Changes – Accept or Reject' . See image below.

Please use 'RECORD CHANGES' option to give your feedback on documents shared by other teachers in the Subject Teachers Forum, this makes sharing feedback and making required changes easy/automatic.

2.6.4 Automatic Table of contents

OpenOffice can help you create table of contents, with page numbers, automatically.

To do this, select / mark a heading in your document and then select the 'Heading 1' in top left corner in the formatting tool bar (usually will be Text body or Default'). This will make that selected text, as a 'Heading 1'. You can use Heading 2 for the next sub heading, heading 3 for the next sub heading etc.

When finished, you can go to the beginning of the document and click 'Insert – Indexes and Tables - Indexes and Tables' to insert a Table of Contents.

File:Resource Book for MRP Cascade training html 789e625f.pngIf you make any changes to the document headings, you can go to the Table of Contents created, right click and select 'Update Index/table'. See image above.

2.7 Kannada in Edubuntu

Writing Kannada Documents

• Please use only UNICODE font - Lohit Kannada. It is already installed in Ubuntu, you have to install it in Windows.
• All nudi fonts are not unicode, and UNICODE is the international and universal open standard that is being used.

Reading Kannada Documents

• If you are not able to read Kannada documents , it is because the font is not installed, you will have to install the font, see the frequently asked questions link in the last section.

Operating System	Software	Font	Keyboard Mapping
Ubuntu	IBus	Unicode- Lohit Kannada	Kn-kgp – Nudi kn-itrans – Baraha kn-Inscript-Kannada Keyboard
Windows	Nudi	ASCII - Nudi Unicode- Lohit Kannada, Tunga	Nudi

Please see the video 'Kannada typing using LibreOffice Writer' available in the Resources CD.

We will be using a new method Ibus for making Kannada documents. (In the previous versions we used SCIM). Below are the steps to configure Ibus and use it.

1. File:Resource Book for MRP Cascade training html 3976403.pngClick on the power button
2. Select Startup Applications

File:Resource Book for MRP Cascade training html m2093ca5f.pngPicture 1

1. A window as shown in the Picture 2 will open. Click on the Add button on the right panel. Another small window 'Add Startup Program' will open. Enter the following details. File:Resource Book for MRP Cascade training html 4ad57276.pngPicture 2 Name: IbusCommand : ibus-daemon (Please note: enter everything here in small letters)Comment : IBus Input method

Click on Add button.

1. Click on the same power button and select System Settings.
2. In the window that opens, select Language Support. A small window saying that not all languages are installed will appear. Select remind me later. File:Resource Book for MRP Cascade training html 4b1019e3.pngPicture 3 # In the Keyboard input method system, select 'Ibus' from the drop down menu. And click on Close
3. Restart the computer.
4. Now when the computer restarts you'll see a small keyboard icon on the top panel as shown in the picture below File:Resource Book for MRP Cascade training html m6eb18eb7.pngPicture 4 # Click on the keyboard icon and select Preferences File:Resource Book for MRP Cascade training html 5f67dbe9.pngPicture 5
5. In the IBus preference window that opens, select the tab that says 'Input Method' and Tick the customise active input method box.
6. Click on the Select an Input Method list bar and Choose the language that you wish to create documents with. In our case, we will be selecting Kannada. The option Kannada will have 3 choices : Kn-kgp, Kn-itrans and Kn-inscript. Kn-kgp use nudi keyboard layout, Kn-itrans uses baraha or transliteration keyboard layout. Kn-inscript uses the standard typewriter keyboard. You can select any of them and click on the Add button. You could add more languages if you wish to.
7. File:Resource Book for MRP Cascade training html 45d5a618.pngPicture 6 Now click on the keyboard icon on the top panel and select Restart.
8. File:Resource Book for MRP Cascade training html 4f180d48.pngOpen an input window like LibreOffice Writer. Configure for typing in Kannada (Refer to page 17 in your module). Press Ctrl and space and start typing in Kannada. You can toggle between the first language in the list (in the picture shown, it is Kannada -itrans) and English using Ctrl and space keys. If you wish to choose any other language click on the keyboard icon on the top panel and select the language from the list. Kn-itrans method can be chosen if you need to use the transliteration key map (Baraha Style). Kn-kgp can be used to input method using the Kannada Ganaka parishat key-map (Nudi style).

Please note that only Arkavattu works a little different here ( Eg to type surya, we need to press sUrfy, instead of the usual sUyF).

2.7.1 Setting up Kannada Language in OpenOffice.org, Ubuntu and Windows

First

1. Click on system → administration → Language support
2. Choose scim-immodule in the input method box.
3. Log off and login again to see the effects.

Next,

1. Open OpenOffice.org Word processor by clicking on Application → Office → OpenOffice.org Word processor
2. Click on Tools → Options → Language settings → Languages
3. Check Enabled for Complex Text Layout(CTL) and Choose Kannada in Default languages for Documents (CTL)
4. Click on OK

2.8 Kannada Typing on Ubuntu in Kannada

ಉಬುಂಟು ವಿನಲ್ಲಿ ಕನ್ನಡ ಟೈಪ್ ಮಾಡುವ ವಿಧಾನ :

• ಕನ್ನಡ ಟೈಪ್ ಮಾಡಲು ಯೂನಿಕೋಡ್ ಫಾಂಟ್ ಗಳನ್ನೇ ಬಳಸಿರಿ,

ಲೋಹಿತ್ ಕನ್ನಡ ಒಂದು ಯೂನಿಕೋಡ್ ಫಾಂಟ್. ಇದು ಉಬುಂಟು ವಿನಲ್ಲಿ ಈಗಾಗಲೇ

ಪ್ರತಿಷ್ಠಾಪಿಸಲ್ಪಟ್ಟಿದೆ.

• ಎಲ್ಲಾ ನುಡಿ ಫಾಂಟ್ ಗಳು ಯೂನಿಕೋಡ್ ಫಾಂಟ್ ಗಳಲ್ಲ. ಓಪನ್ ಆಫೀಸ್ ನಲ್ಲಿ ಕನ್ನಡಭಾಷೆಯನ್ನು ಅಣಿಗೊಳಿಸುವ ವಿಧಾನ':' ಈ ಮುಂದೆ ಸೂಚಿಸುವಂತೆ ಕ್ಲಿಕ್ ಮಾಡುತ್ತಾ ಹೋಗಿರಿ.
• System > Administration > Language support.
• Input method ಬಾಕ್ಸ್ ನಲ್ಲಿ I-bus ನ್ನು ಆಯ್ಕೆ ಮಾಡಿರಿ.
• ಲಾಗ್ ಆಫ್ ಮಾಡಿ ಮತ್ತೆ ಲಾಗ್ ಇನ್ ಆಗಿರಿ.
• Application > Office > Open office.org ಮೂಲಕ Open office.org Word ಅಥವಾ Writer ಪುಟವನ್ನು ಆಯ್ಕೆ ಮಾಡಿರಿ.
• ನಂತರ Tools > options > Language setting ಗೆ ಹೋಗಿ ಅದರ ಎಡಭಾಗದ ಬಾಕ್ಸ್ ನಲ್ಲಿರುವ + ಅಥವಾ > ನ್ನು ಒತ್ತಿರಿ, ಒತ್ತಿದೊಡನೆ ಕೆಳಗೆ ಗೋಚರಿಸುವ Languages ನ್ನು ಕ್ಲಿಕ್ಕಿಸಿ.
• ನಂತರ ಬಲಭಾಗದಲ್ಲಿ ಗೋಚರಿಸುವ Enhanced Language support ನ ಕೆಳಕಾಣಿಸುವ Enabled for Complex Text Layout ನ್ನು ಟಿಕ್ ಮಾಡಿ, ನಂತರ ಮೇಲೆ ಕಾಣುವ CTL ನ ಎದುರಿರುವ ಜಾಗದ Default language ಜಾಗದಲ್ಲಿ kannada ಆಯ್ಕೆ ಮಾಡಿರಿ. OK ಮಾಡಿರಿ.
• Open office.org Word ಅಥವಾ Writer ಪುಟಕ್ಕೆ ವಾಪಾಸು ಬನ್ನಿರಿ. Ctrl + Space bar ಕೀ ಒತ್ತಿದಾಗ ಸ್ಕ್ರೀನ್ ನ ಬಲತುದಿಯಲ್ಲಿ ಮೇಲೇಳುವ ಭಾಷೆಗಳ ಪಟ್ಟಿಯಲ್ಲಿ kannadaಕ್ಕೆ ಹೋಗಿ Kn-Kgp ಆಯ್ಕೆ ಮಾಡಿರಿ. ಆಗ ಕನ್ನಡ ಟೈಪ್ ಮಾಡಲು ಸಾಧ್ಯವಾಗುವುದು '.ಅದೇ ಪುಟದಲ್ಲಿ ಮತ್ತೆ Ctrl + Space bar ಕೀ ಒತ್ತಿದಾಗ English ಟೈಪ್ ಮಾಡಬಹುದು. Ctrl + Space bar ಕೀ ಯನ್ನು ಇಚ್ಚಿತ ಭಾಷೆ ಆಯ್ಕೆಯ ಹೊಯ್ದಾಟದ ಕೀ ಯಂತೆ ಬಳಸಿರಿ. ಕನ್ನಡ ಟೈಪ್ ಮಾಡಲು ಅಗತ್ಯವಾದ ಕೀಲಿ ಮಣೆ ವಿನ್ಯಾಸ'.
• File:Resource Book for MRP Cascade training html 4cae7094.gifCAPITAL ಅಕ್ಷರಗಳನ್ನು ಟೈಪಿಸಲು Shift ಅಥವಾ Caps Lock ಕೀ ಬಳಸಿರಿ. 'ಒತ್ತಕ್ಷರಗಳನ್ನು ಟೈಪ್ ಮಾಡಲು ಸರಳ ವಿಧಾನ'.
• ಅಕ್ಷರ ಟೈಪ್ ಮಾಡಿರಿ, ಅದಕ್ಕೆ ಕೊಡಬೇಕಾದ ಒತ್ತನ್ನು f ಕೀ ಒತ್ತಿದ ನಂತರ ಒತ್ತಿರಿ.
• ಉದಾ: ಉ ತ್ಕ ಟ = u t f k q. ಚೆ ಕ್ = c e k f ಕೃ ತಿ = k R t I ಅ ರ್ಥ = a TF ರಾಷ್ಟ್ರ = r A x f q r ಉ ತ್ಕೃ ಷ್ಠ = u t f k R x f Q.

3 Web Resources

In order to access the internet, please open the web browser Mozilla Firefox. Go to Applications – Internet – Mozilla Firefox.

To search for any topic of your choice, type www.google.co.in in the address bar. If you already know the name of the website, you can type it in the address bar. For example, our website is [[2]].

(Please make sure you are typing correctly; please do not make spelling mistakes.). Please note: If you click on the 'kannada' option in the above window, you can browse the web in Kannada.

File:Resource Book for MRP Cascade training html m4d3196a.jpg

Bookmarks

If you want to keep going to the same website again and again, you can add it to your bookmarks. This is a shortcut which will help you go to the site faster.

To do this, please see the menu options on the top left corner of your browser. There will be an option called book marks. Please click on it and click on 'bookmark this page'. Next time when you open your browser, you can click on bookmarks and select the website instead of typing it out.

Copying the website address

If you want to give the link of the website in your resource book, just highlight the text of the page (which is in your address bar). Copy the link and paste it in your document.

Saving a web page

If you want to save the contents of a webpage on your machine, in the menu bar click on File – Save as (this is similar to how you save a document. The only difference is that the file will be saved in .html format and will be opened using the Firefox browser.

Copying the contents of the webpage

If you would like to copy the contents of the webpage, go to Edit – Select All. Right click on the page, Select copy and then paste it on to the document.

Some useful websites:

[[3]] (RMSA's Subject teacher forums website where all your resources will be available.

www.kn.wikipedia.org (Kannada wikipedia)

www.wikipedia.org (English Wikipedia)

www.khanacademy.org (Teaching Learning Videos)

www.youtube.com (All Videos)

www.kanaja.com

www.gmail.com

[[4]]

(Google books. You can find many books here on any subject of your choice)

[[5]]

[[6]]

3.1 Email and mailing list

3.1.1 How to create an email id

To create an email id you can go to any of the following websites

www.gmail.com

www.yahoomail.com

www.rediffmail.com

This handout will explain how to do this on www.gmail.com

On the right side bottom of www.gmail.com, you will see the option 'Create a New Account'.

You will have to fill the next page that appears page to fill. (The picture on top is an example of the form that you have to fill.) Please fill it carefully. Make sure that you write down your username and password in a safe place so that you do not forget it.

The following step on gmail usually asks you to fill in your mobile number. Once you do that, you will get an sms with a number in it. Enter the number and then you are done. Your e-mail id is ready!

How to email

1. Open Mozilla Firefox. Type www.gmail.com (or other site where your mail is) in the address bar.
2. Enter your username and password CORRECTLY.
3. To check your existing messages, go to Inbox.
4. To compose a new message, go to 'Compose Mail'. These can be found on the left panel.

The Compose Mail Window

The compose mail window will look like this.

3.1.2 Making a mailing list

State resource persons will give a list of the participants (after creating their email ids). This list should include the following data:

1. Name of participant
2. Block
3. District
4. School
5. Subject taught
6. Classes taught
7. Mobile Number
8. Email Id
9. Name of computer programme in the school
10. Number of working computers

3.1.3 Making a Google Group

This google group will help you keep in touch with all the participants through email. All the participants email ids will be added to the group and a group email list will be created. If you send a email to this email list, it will go to all the teachers.

In order to make a google group, please go here: [[7]]. Click on the icon 'Create a group' . The next step is to put in your username and password (please put same details as you put while logging into your gmail).

Next step is to fill the form below.

1. Give a name for your group and create an email id (eg. bagalkotsciencestf@googlegroups.com).
2. Put a small description of what your group is about.
3. File:Resource Book for MRP Cascade training html 7299073a.pngLastly tick the 'restricted' category so that only you can add members to the group.) After this, add all the participant email id in the next page and write an invitation message to welcome them to the group.Your google group is ready. To send all members a mail, please send it to bagalkotsciencestf@googlegroups.com (this is an example name).

3.2 Thunderbird Mail Client

• Thunderbird is a free, open-source, cross-platform application for managing email and news feeds. It is a local (rather than a web-based) email application that is powerful yet easy-to-use.
• Thunderbird is free. Also, it gives you control and ownership over your e-mail.

3.2.1 Advantages of Using E-Mail Clients

• First, using an email client can be a tremendous time-saver if you have multiple email accounts.
• If you want to check for new messages across all of your email addresses, then that means that you will have to log in to several different sites.
• Once you download and set-up an e-mail client like Outlook or Thunderbird, it will download your mails across all of your accounts, so that you can access them all at one easy place.
• One of the greatest advantages of using an e-mail client is that they allow you work with your e-mails even when you are offline (which will be demonstrated).
• You can group your messages/mails into folders.

3.2.2 Configure Gmail on Thunderbird:

• File:Resource Book for MRP Cascade training html 5f61f6e9.pngYou can read your Gmail messages from a client or device that supports POP, like Microsoft Outlook or Mozilla Thunderbird.
• Enabling POP in Gmail:
  • Sign in to Gmail.
  • Click the gear icon in the upper-right and select Mail settings at the top of any Gmail page.
  • Click Forwarding and POP/IMAP.
  • Select Enable POP for all mail or Enable POP for mail that arrives from now on.

3.2.3 Adding Your Gmail Account to Thunderbird

1. To add a new mail account in Thunderbird, follow the steps:

• When you open Thunderbird for the first time, you need to create a mail account (your existing e-mail account).
• Go to File → New → Mail Account.

• The Mail Account Setup box will appear and you need to enter your details (User name, password, e-mail ID etc) as shown:

• Click Continue after you enter your details. The server starts verifying the details to setup setup your account.

• File:Resource Book for MRP Cascade training html m793fa7ad.pngOnce the details are verified, click Create Account.
• Your account is now created and Thunderbird downloads your messages from the server.

Filtering Messages

• Message filters are useful if you routinely want to perform certain actions on messages, according to criteria that you've specified.
• For instance, you can have incoming mail automatically sorted into different folders, with certain messages labelled, marked as Junk, or even deleted.
• Filters can be applied automatically to incoming mail, or you can run them manually when desired. (This will be demonstrated)

3.2.4 Gtalk – Web based Video and Voice Chat

Google Talk is an instant messaging service that provides both text and voice communication. People use the Internet for instant messaging, voice & video chatting etc.

• GTalk is an equipment through which you can interact with people.
• If you have an account with Google, i.e. a Gmail ID, then you can use GTalk to message, audio/video chat with people from anywhere in the world.
• You can save a lot of time and money using video conferencing.
• You can avoid travelling to distant places to participate in meetings.
• You may attend a meeting from your houses or offices.

3.2.4.1 Getting Started:

1. Open Firefox Browser on you system
2. Go to www.gmail.com
3. Login to your account using your Gmail ID.

Note:

To use GTalk, one must have a google account. If you do not have a Google account, then:

• Go to www.gmail.com
• Click on the Create Account button in the top right corner of the window
• Enter the required details and create your account.

Once you login, you can see the list of contacts on the right side of the window. There are some coloured icons present in front of each of your contacts' names:

	The person is available
	The person is busy
	The person is idle
	The person is offline (or Not Available)

If you do not have any contacts added in your contacts list, then you can add one or more by entering their e-mail id in the search bar just above the chat (as shown in the screen shot).

File:Resource Book for MRP Cascade training html m1f535609.png

To start a conversation with a person, you must click on his/her name.

File:Resource Book for MRP Cascade training html m2e910d43.pngAfter clicking on the persons name, you will get a small chat box on the bottom right corner of the window (as shown in the screen-shot).

3.2.4.2 Instant Messaging:

• Click on the rectangular box to start typing your message.
• After you have entered your message, press “Enter” to send your message instantly.
• When you hit Enter, the other person receives your message instantly.

3.2.4.3 Audio/Video Chatting:

• To start an audio chat, you will require a microphone.
• To start a video chat, you will require a web-camera.

To start an audio or video chat, you will need to first install the Voice and Video chat plug-in.

3.2.4.4 Installing Voice and Video chat plug-in:

In the chat box, click on the phone or the video symbol.

File:Resource Book for MRP Cascade training html m49bd3c42.pngFile:Resource Book for MRP Cascade training html 44b32381.png

• Click 'Click Here' which appears in the chat box.
• You will get a separate confirmation box. Click on “Get Started”.
• You will be redirected to a separate page.
• Click on “Install Voice and Video Chat” which appears on the right side of your page.

• Select your appropriate download package and click “Install voice and video chat”. It is usually the first one '32-bit .deb (For Debian/Ubuntu)

• The package will be downloaded.
• Right click on the downloaded file and select “Open with Ubuntu Software Center”.
• This will open up Ubuntu Software Center.
• Click “Install” which appears on the right side.
• This will install the plug-in for voice and video chat on Gtalk.
• This installation will take a while and this will install the features which are required for the audio and video chat.
• This will permanently install these features and you do not have to install them each time you want to start any audio/video chat.
• This is a one time installation!

4 Computer Aided Educational Tools

We are all witnessing widespread developments in IT Education. More and more ICTs (Information Communication Technology) are being used in almost all aspects of our lives. In our education system all teaching-learning methods are witnessing a shift from teacher centred teaching to a more learner centred one. The possibility of making this shift is high by using computer aided tools to bring to life abstract mathematics and science concepts.

National Curriculum Framework (NCF) 2005 talks of a major shift in teaching education programme from passive reception to active participation in learning. From learning within the four walls of classrooms to learning in the wider social context. From knowledge as “given” and fixed to knowledge as it evolves and is created. From linear exposure to multiple and divergent exposure. Moving from a teacher centred lecture driven classroom to more learner centred classrooms. Using these computer aided tools as teaching-learning aids will enable teachers to make these shifts suggested by the NCF 2005. The children will be able to construct their own knowledge via hands on experimentation by using these computer tools. To enable children to connect these learnings and utilize the tools to the best possible extent, it is essential for subject teachers to facilitate this learning experience.

It is therefore important for the teacher to understand how to use these various tools and become confident users of the same to bring about maximum understanding of the subject using these tools as aids.

Integrating tool with classroom lessons

There is no one fixed solution that works for integration of computer aided tool usage with classroom chalk-talk lessons. It depends on the teacher, her students and the availability of computers. If the students have access to the computer in groups in the computer period, then one could follow the process outlined below.

• Introduce the topic in the classroom with regular chalk and talk process
• Create an activity related to the topic to be done in the computer period in the lab.
• Discuss the topic and learning in the classroom again after the students have done the activity.

There may not be time available to cover each and every topic in this manner. The teachers must use their judgement to plan which topics they think are key or critical to integrate with the tool.

4.1 List of Tools and their usage

We give here some important tools and a brief description of how to incorporate them into lessons.

4.2 Freemind

File:Resource Book for MRP Cascade training html m3b072ae4.pngAbout Freemind

Freemind is primarily a tool for creating and editing mind maps. It can be used by teachers to plan lessons, plan stories, organize their academic year etc...

Resources of mind maps available for teachers

www.gnowledge.org has many mind maps created for teaching various topics in many subjects that can help you plan lessons and also get new ideas.

How to Install Freemind

Please see section on how to Install New Software in this document.

File:Resource Book for MRP Cascade training html m77fc7a7c.pngHow to use Freemind

To Open from the desktop menu select Applications > Office > Freemind

Once Freemind is open for Help select menu option Help > Documentation

To create a mind map, first select the mode as Modes > Mindmap (shortcut ALT+1)

then select FILE > NEW (shortcut Ctrl+N). You should see a screen as follows:

To save select menu option FILE > SAVE AS to see the window below, select the folder /home/bindu/Documents/ITFC/TCoL) to save file and also the name (story) of the mind map.

Note: [./ - means current folder; .// - means parent folder]

To start writing the mind map use the following options selecting from the menu option

Edit > Edit (Shortcut F2)

Edit > Edit a Long Node (Shortcut Alt +Enter)

Edit > New Child Node (Shortcut Insert)

File:Resource Book for MRP Cascade training html m248a2ce9.png

4.3 Science

Simulating Experiments using a Computer Tool

Science is best learnt by doing and observing. When for different reasons the students do not have access to physics laboratory, making use of computer aided tools to simulate these phenomenon provide students with a virtual laboratory. Using these tools that simulate a science lab is useful to bring children closer to visualize the concepts better and therefore understand some of the complex and abstract phenomenon.

Audio visual aids played an important role to classroom teaching and learning. But in the present context of constructivist learning, interactive software becomes very relevant as it enables children to construct their own experiments and observe the results.

4.3.1 PhET

How to install PhET

File:Resource Book for MRP Cascade training html 49e13d8a.pngPlease see the section Additional Installation Guidelines

PhET is a tool that has several science simulations already built-in. There are simulations in Physics, Chemistry and Biology. The power of this tool is that it is possible to simulate experiments that are difficult to perform. It is also very effective for analysing phenomena that occur. This is how the PhET window looks. We will now click on the orange tab which says “Play with sims....>”

File:Resource Book for MRP Cascade training html 154e3c60.pngPhET Opens in the Firefox Web Browser. When you install the Ubuntu public software, PhET simulations are already downloaded on your machine, so you do not need internet access.

How to open a simulation

As an example a simulation in Physics is shown below.

This will open a page of simulations with an index on the left. Click on Physics and Motion under Physics on the index. You will see all the simulations listed here.

File:Resource Book for MRP Cascade training html m2e8dce7f.pngNow select Energy Skate Park .

This simulation shows total energy is conserved and how Potential Energy-Kinetic Energy conversion takes place.

When we click on this simulation the application will prompt you to either Open or Save it locally.

As all files are already saved locally click on open to start the simulation.

Lesson plan using a simulationThe simulation window will open which looks like this.

File:Resource Book for MRP Cascade training html m33ff9c37.pngFile:Resource Book for MRP Cascade training html m33ff9c37.pngThe simulation settings in more detail below.

• There is a track along which the skater can move.
• We can choose the skater; the mass.
• You can choose to add measuring tapes; this will help measure distance. If you mark the potential energy reference, you can see where the PE is zero. The grid will help plot the position.
• You can also choose to see the path – the points will be marked on the simulation as the skater goes back and forth. The display of KE, PE and total energy can be shown through a bar graph. The “pie chart” gives you the legend.
• You can also plot the energy changes with respect to time as well as position of the skater. One key parameter in the simulation is gravity.
• You can simulate this experiment on the moon, Earth or Jupiter. You can also simulate it in space. The value of “g” in the box will change when you click on these different options. Notice that gravity is given as N/Kg; what we refer here is acceleration due to gravity and has the units m/s².
• We can also add track friction (not visible in this snapshot) and demonstrate what happens to the skater.

Process

• Now start the simulation; after adding the grid.
• Add add the PE reference at 0 metres to be 0.
• Now we will click on the Bar Graph: This will show the changes between PE and KE. Notice that the thermal energy is zero.
• Energy Position Graph Energy-time graph. This will display the PE and KE with respect to position above the ground.
• The Energy Time Graph will show the PE and KE swings across time.
• Notice that in all these graphs the KE reaches zero; but the PE is never zero. The PE is never zero because we the lowest part of the track is still above the ground; we have defined the ground as the PE reference of zero. A snapshot of these graphs is given below.

File:Resource Book for MRP Cascade training html m184d8985.pngNow we will look at what happens to the skater when you add track friction and we plot all these graphs.

This is how the graph will look as the skater slows down due to friction and the KE reduces to zero.

Now the skater has come to rest and the KE has come to zero.

File:Resource Book for MRP Cascade training html m6b8d0fc.pngNow you can reset the simulation and run it for different values of acceleration due to gravity.

Questions for discussion:

What do we mean by PE reference?

What does change in PE mean with respect to the reference?

What are the implications of adding friction?

Can you connect this to the gravitational force of attraction?

4.3.2 Step

About STEP

STEP is an interactive tool for Physics; it can be used for simulating complex interactions in mechanics.

Installing Step

Please see the Install New Software section to install it if it is not available on your Ubuntu system. You will need to be connected to the internet for this.

Opening STEP

On the desktop click Applications > Science > Step OR Applications > Education> Step

The STEP Window

This is how the STEP window looks. The main components :

File:Resource Book for MRP Cascade training html 739ba204.jpgPalette – which contains the objects, interactions and components

World Scene - where the objects interactions and components are added to create the simulation

Properties Window – Where properties of objects from the palette can be viewed and edited

History Window – Where the history of the simulation is recorded

Simulate Button – To start and stop a simulation

Lesson Plan using a simulation

Purpose

Learn to create a simulation in STEP. This activity will simulate free fall of an object.

Process

• Click on a Disk in the palette window and then click on the world scene to add the object
• Once an object has been added, an interaction can be added to the object
• Click on Weight Force in the palette window and then click on the disk in the world scene . A red line will appear indicating that the interaction has been added.
• Now click on Simulate to view the simulation.
• To restore the objects to their original position click on undo
• Observe the disk properties in the properties window and discuss

File:Resource Book for MRP Cascade training html m53f01d9a.pngTo save a simulation in STEP ,

• go to menu item File -> Save As
• All files will be saved with the extension “step”.
• Once you save a simulation, you can simply open a simulation and demonstrate.

4.3.3 K Tech Lab

About K Tech Lab

K Tech Lab is a free software which helps to make different types of circuits (electronic & electrical) and conduct experiments. Various electronic components like resistor, diode, switch, transistor, micro controllers etc. can be run using this software. Since it works in GUI mode, it is very easy to handle. The components required for electric circuits can be easily dragged into the work area using a mouse. When we join the pins using mouse, the circuit is formed. The properties of each component is displayed when bring the pointer above it. Students are not able to do some experiments which involve real devices and consumables, even in groups. But these experiments can be done in KTech Lab environment. Thus loss due to the damages and lack of consumables can be avoided. Using this software students can easily form the circuits and can repeat the experiments a number of times.

How to Install K Tech Lab

• You will require Internet connections
• Go to [[8]]
• Click on the green download button and click save.
• The file ktechlab_0.3-6_i386.deb will be downloaded.
• Go to Ubuntu Menu Places > Home Folder
• Select Downloads folder
• Double click on ktechlab_0.3-6_i386.deb, the software will be installed

Introduction to K Tech Lab Interface

First in the File Menu Option Select File > New and Select Circuit as shown below

File:Resource Book for MRP Cascade training html mf5bdd8d.pngFile:Resource Book for MRP Cascade training html 55b073f9.png

K Tech Lab Window

File:Resource Book for MRP Cascade training html m70144323.png

Component Tab

This tab contains different electronic components that can be used in K Tech Lab. It includes various electrical components, discrete components, switches, output devices, logic components, connection, Integrated Chips etc.

Sources : This section contains various voltages, current sources.

Discrete : Resistors, Condensers, Diodes, transistors etc. are available here.

Outputs : Output components such as LED, Signal Lamp, devices like Voltmeter, Ammeter,

Oscilloscope etc. are arranged in this section.

Work Area: This is the space for building the electronic circuits.

Oscilloscope: It helps to recognise the signals with wave form in graphical mode.

All components can be dragged and dropped in the Work Area to create a circuit.

To connect the components to make a circuit select either 'Automatic' or 'Manual' as shown below. Please use Automatic as a beginner.

File:Resource Book for MRP Cascade training html c9a3ec1.pngAutomatic

Select 'Automatic' from the connection routing mode in the

toolbar. The pointer changes its shape when brought to the lead of the component to be connected. The drag and reach near the lead of the other component. The colour of the line changes and the connection is completed when the mouse is released.

Manual : Select 'Manual' from the connection routing mode in the toolbar. To connect the leads of the electronic components in this mode, bring the mouse pointer near the first lead. The mouse pointer changes, then click at the point and drag in the direction we require. To have a bend

in the circuit click and move the mouse according to our need. When we reach the next lead the colour of the line changes, then click and complete the connection.

To change the orientation of the electronic components: Right click on the component, which is in the work area, and then change the orientation of that electronic component as required.

Activity 1: Basic Circuit

File:Resource Book for MRP Cascade training html m415796e9.pngPurpose: To learn to make a basic circuit with battery, switch, signal lamp and voltmeter

Process

1. Drag and Drop a a battery, switch (SPST) and a signal lamp in the work area.
2. Use 'Automatic' connection and the mouse to connect the circuits as shown below.
3. Click on the switch to see the lamp glow.
4. Add a voltmeter and observe the reading when the switch is turned off versus on.
5. Save a K Tech Lab Circuit file

File:Resource Book for MRP Cascade training html 3905cb44.pngSave File : Select File > Save and enter file name Activity_1 and save the file. It will save with a .Circuit extension. Click on Save

To open a file select File > Open and select file to open

Discussion Points

• Discuss this with reference to a torch.
• File:Resource Book for MRP Cascade training html 439f8339.pngDiscuss what happens when the circuit is broken (switch is off), so children understand that a switch breaks a circuit.

Activity 2: Cells in Series/Parallel

Purpose: To connect cells in series and observe the voltmeter and ammeter readings readings

Process

1. Drag and Drop 3batteries, switch (SPST), a signal lamp and voltmeter as shown in the figures in the work area.
2. File:Resource Book for MRP Cascade training html m54db48a4.pngUse 'Automatic' connection and the mouse to connect the circuits as shown below, first the cells in series, then the cells in parallel.
3. Click on the switch to see the lamp glow.
4. Observe the reading of the voltmeter when the switch is turned off/on versus on.
5. Save the file as Activity_2

Discussion Points

• You may discuss what happens to the current and voltage (potential difference) when connected in series .
• Compare water flowing through a pipe, and current flowing through the circuit and see if it can be explained this way.

Activity 3 Ohms Law Verification

Purpose

To verify Ohms Law

Process

1. File:Resource Book for MRP Cascade training html 5e9678ce.pngDrag and Drop a batteries, switch (SPST), an ammeter and voltmeter as shown in the figure here.
2. Use 'Automatic' connection and the mouse to connect the circuits as shown below.
3. Click on the switch and record the voltmeter and ammeter readings
4. Click on the resistor and change the value of the resistance and record the readings of the meters.
5. Click on the battery and change the voltage of the battery.
6. Record the different readings.
7. Save the file as Activity_3

4.4 Social Science

4.4.1 KGeography

About KGeography

KGeography is a Geography educational tool that allows you to explore maps by continents, countries. Children can explore states, their capitals, flags etc of each country.

Purpose

In an interactive and fun way allow children to explore the world maps and create activities to enhance the children's knowledge about a specific continent, country or state. Can introduce children to concept of direction (north south east west), routes etc...

How to Install KGeography

Please see section on how to Install New Software in this document.

Activity 1: To open and use the basic Explore Map option.

File:Resource Book for MRP Cascade training html 4f980be1.jpg

• To explore a continent or country click on File > Open Map and select a country and click OK
• File:Resource Book for MRP Cascade training html 325bfc6d.pngPlace mouse over the region in colour and left-click to view Name and Capital

Computer Lab Activity Ideas:

1. First explore India, and all the states and capital
2. Point out the islands of India and talk about what islands are.
3. Explore North South East West directions
4. File:Resource Book for MRP Cascade training html m2a41030b.pngTalk about what a capital of the state means, also talk about the capital of the country.
5. Ask if someone has to travel from place A to B (Bangalore, Karnataka to Puri, Orrisa) what states they need to pass and which direction they need to travel.
6. Identify the smallest and largest states
7. What states are called the “Seven Sisters”. What is Karnataka called ?

Activity 2 : Test yourself

• To test yourself , select any tab (Location of States and Territories) in Test Yourself as seen in image in previous page.
• The window below will appear, select the number of questions (1 to 35) and select OK
• The question will appear on the left hand panel
• File:Resource Book for MRP Cascade training html 53f83736.jpgWhen all questions are completed the results are shown below. Each state is marked by a distinct colour and the result shows the correct answer and what the user marked.

4.4.2 Marble

Marble is like a desktop Atlas that you can use to learn more about Earth. You can zoom in and out looking at different places in the world. There are different thematic map here: A classroom-style topographic map, a satellite view, street map, earth at 'night and temperature and precipitation 'maps. All maps include a custom map key, so it can also be used as an educational tool for use in class-rooms. For educational purposes you can also change date and time and watch how the starry sky and the twilight zone on the map change. Not only do you get globe view, but you can change it to a Flat Map as well.

How to install

• Go to system – Administration – Synaptic Package Manager.
• Type Marble in the search bar.
• It will usually be the first option that you get. Right-click – Click on Mark for Installation.
• Click on Apply
• Once this is complete, Marble will be available in Applications – Education – Marble.

File:Resource Book for MRP Cascade training html 493be2bd.pngHow to Measure Distances

To measure the distances between two places on the earth, right click on the first location and click on “add to measure”. Click on the second location.

• A red line is drawn between the two locations and the distance can be seen on the top left corner in a box.
• How to Set the time
• You can change the time to whatever you like on Marble. Go to View – Sun Control
• Use this window to play around with the time

• How to Download new maps
• Go to file – Download Maps. Click “install” on the maps you want to download. (you need to be connected to the Internet for this). For more information on how to use Marble, please click [[9]]

4.4.3 KStars

About KStars

KStars is a Desktop Planetarium for KDE. It provides an accurate graphical simulation of the night sky, from any location on Earth, at any date and time. The display includes upto 100 million stars, 13,000 deep-sky objects,all 8 planets, the Sun and Moon, and thousands of comets and asteroids.

To access KStars click on Applications > Science> Kstars

File:Resource Book for MRP Cascade training html m3916dc4.pngActivity 1 Solar Eclipse

Purpose

To view the solar eclipse as seen in Bangalore on January 15^th 2010.

Process

1. Set the location as Bangalore by selecting file menu option Settings > Geographic or pressing Ctrl+G
2. Select Bangalore, India as the location.

1. Set the time by selecting file menu option Time > Set Time or pressing Ctrl+S

1. Press Ctrl+F and find the sun on the map.

1. Press the play/Pause button to start the simulation, and keep the time at 10seconds File:Resource Book for MRP Cascade training html m13abc4e6.png

Activity 2 Solar System

Purpose

View the solar system. And see the revolution of the planets around the sun.

Process

1. Set the location as Bangalore by selecting file menu option Tools > Solar System or pressing Ctrl+Y
2. Press Play button to simulate the movements of the planets
3. Use the scale to place an orbit of any planet at 0 , when the planet is at position 0, note the clock measure and stop the clock when it comes back to zero position to measure how long the planet takes to complete one revolution.

4.5 Mathematics

4.5.1 Geogebra

Introduction to Drawing in Geometry

In many of our schools we are seeing children struggling to grasp mathematics concepts. Sometimes explaining concepts such as point, line, plane, chord, radius become very vague for children and hence prevents them from grasping the concepts completely and hence they struggle to progress in the subject.

There are many new methods that are being adopted to make concepts less abstract in mathematics like using pictures, cutting shapes out of cardboard etc... Often these aids are very time consuming. IT based tools allow us to easily manipulate drawings and allow children hands-on experience and visual stimulation to make mathematics come alive and be less vague.

Geogebra is a good example of a computer aided tool, which helps us in learning Geometry, Algebra and Calculus. It is a free software, which functions in GNU Linux Operating System.

Geogebra cannot replace children using the compass box to draw. The children in classes must use the compass box and pencils to draw and construct. This tool must be used by teachers to animate some concepts and theorems to enable them to use it as a teaching aid to further their own teaching methodologies.

About Geogebra

Geogebra is dynamic mathematics computer aided tool for schools that combines geometry, algebra, and calculus.

One part of Geogebra is an interactive geometry system. You can do constructions with points, line segments, parallel lines, line intersections, polygons, circles and more.

Another part of Geogebra allows you to enter equations and coordinates directly. Thus, Geogebra has the ability to deal with variables for numbers, vectors, and points.

You can also see the algebraic expressions of the figures you draw and change the values in algebraic expressions to dynamically see the change in the geometry figure and vice-versa.

Opening Geogebra

File:Resource Book for MRP Cascade training html m5bfc5045.gifOn the desktop click Applications > Science > Geogebra or Applications > Education> Geogebra.

Installing Geogebra

Please see the Install New Software section to install it if it is not available on your Ubuntu system. You will need to be connected to the internet for this.

The Geogebra Window

The figure shows the default Geogebra Window. The details of each section are explained below.

Menu Bar: Typical windows command menu bar. We will be using the File command only.

Tool Bar: Has all the tools (compass box) to use in the graphic view

Display for Tools: It tells you which tool is active to use on the graphic view

Graphic View: Used to draw the geometric figures. This window can never be closed.

Algebra View: Shows the algebraic expressions. This window can be closed if you are working only on geometry.

Input Bar: This is used to enter more complex mathematical expressions that may not be available on the Tool Bar. (Not used in this training session)

Commands: To use along with the Input Bar, to select from a list of available commands. (Not used in this training session)

Tool Bar

File:Resource Book for MRP Cascade training html 48e11462.pngWe can consider the Tool Bar to be like a compass box. Today we will consider the Geogebra tools that correspond to using a pencil, a ruler and a compass in a compass box.

File:Resource Book for MRP Cascade training html m2e9355f9.pngTo see the list of related tools , click on the arrow at the bottom right hand corner of each tool as shown below.

Basic Use of Tools (Refer to above diagram, left)

• Activate a tool by clicking on the button showing the corresponding icon.
• Open a toolbox by clicking on the lower part of a button and select another tool from this toolbox.

File:Resource Book for MRP Cascade training html m1b350d49.pngGraphic Window with Grids Displayed (Refer to above diagram,right)

• Place the mouse pointer over the graphic 'view 'area. Right Click and check the Grid option. To remove the grid view, un-check the option. See diagram below.

Activity 1: Drawing pictures with Geogebra

Purpose: To familiarize oneself with the Geogebra window and some of the basic geometry tools.

Process

Use the mouse and the following selection of tools in order to draw figures on the drawing pad.

Start by drawing the following : [ A Point, A Line Segment, A Square, A House, A Circle]

File:Resource Book for MRP Cascade training html 6308ecb2.png

Hint Box

Observe the Algebra View Geogebra is case sensitive and uses mathematical naming norms If you move the cursor close to the grid intersection, it will show you the point of the intersection and you can click to place the object at the intersection coordinates Use the move icon to move the figure you have drawn and observe the algebra window You can also move the labels to make the diagram more readable

Activity 2 : Saving/Opening Geogebra files

Purpose

Save and retrieve Geogebra Files.

Process

1. Open the File menu (Menu Bar) and select Save.
2. File:Resource Book for MRP Cascade training html m18ab2ba9.gifSelect the folder Your Name > Workshop > Geogebra in the pop-up dialogue window.
3. Type in a name for your Geogebra file.
4. Click the Save button to save the file.

To Open an existing Geogebra file select menu File > Open. A Open Window (just like the save window) pops up. Select the folder that you had saved the file and look for the file with extension '.ggb' in the box on the left side and click Open.

Hint Box

A file with the extension ‘.ggb’ is created. This file extension can only be opened with Geogebra. Give simple short names for your files like Activity_1.ggb.

Activity 3 (Measurement)

File:Resource Book for MRP Cascade training html 774a7366.pngPurpose

To learn to use the measurement tools Angle and Distance and Length.

Process

1. Open file 'Activity_1.ggb'.
2. To measure select the tools from the Angle toolbar. Use these tools to measure the following
   1. Measure the Length of the Line Segment (Distance or Length)
   2. Measure the Angles of the Square (Angle)
   3. Measure the Circumference of the circle (Distance or Length)

Hint Box

When you select an object on the graphics window, it gets highlighted. You can right click on any object, select properties and can change properties such as colour, what to display : Name, Value etc... (See Diagram Below) To measure interior angles, the three points must be selected clock-wise , so the middle point selected is where the angle is measured.

Activity 4 Triangles

Purpose

To verify that the sum of the interior angles of a triangle are 180 degrees.

Process

1. Draw three points A, B, C (New Point tool)
2. Draw three line segments AB, AC, BC (Segment between two points tool)
3. Select the Angle tool to measure each of the interior angles of the triangle.
4. Now verify that the sum of all the interior angles equals to 180 degrees.
5. Select one of the vertices of the triangle (A,B or C) and move the points (Move tool) to change the shape of the triangles.

Hint Box

Remember to save the file as 'Activity_4.ggb' Notice which objects are free objects and which objects are dependent objects. You can move only free objects

Constructive Corner

You may make the children do this exercise before you prove the theorem in class, allowing the children to arrive at the theorem themselves. Observe what happens when you move all three points A,B,C to lie on a straight line. Creating tables like the one below and asking them to write down the values, would help them focus on what to observe. Angle BAC Angle CBA Angle ACB Sum of all Angles

Activity 5 (Explain different types of polygons)

Purpose

To demonstrate the different types of polygons .

Process

1. Create a slider by clicking on the Slider tool File:Resource Book for MRP Cascade training html 7d501021.png
2. Select Radio Button: Number, Name: a, min: 3, max:10, Increment: 1 and press Apply.

1. File:Resource Book for MRP Cascade training html 55c8b87c.pngSelect the tool Regular Polygon and mark the two points A and B of one side of the polygon on the drawing pad. You will be prompted with a window as shown. Please put the slider name “a” in the box provided and press OK.
2. Select the Insert Text tool and write the text: A polygon with three sides is called a TRAINGLE as shown in the figure along-side and press OK. File:Resource Book for MRP Cascade training html m54a4f415.png
3. Right click on the text created and select object properties. Click the Advanced tab. Enter a=3 in Condition to Show Object and press OK.
4. Repeat steps 4 and 5 for as many polygons 7 more times to show up to 10 sided polygon.
5. Select the move tool and demonstrate the different polygons.

Constructive Corner

What is the minimum number of points you need to define to make a polygon. What is a regular polygon (All Sides are equal) Ask the students to try and recognise more properties in each polygon.

Activity 6 (Explain different terms related to circle)

Purpose

To enable understanding of different terms and definitions related to a circle.

Circle: The collection of all the points in a plane, which are at a fixed distance from a fixed point in the plane, is called a circle. The fixed point is called the centre of the circle and the fixed distance is called the radius of the circle.

Process

1. Draw a Circle using the circle with centre through point tool
2. Draw multiple line segments using the line Segment tool where one point is on the circle centre and the other point anywhere on the circumference of the circle.
3. Observe the value of the line segments.

A circle divides the plane on which it lies into three parts. They are: (i) inside the circle, which is also called the interior of the circle; (ii) the circle and (iii) outside the circle, which is also called the exterior of the circle. The circle and its interior make up the circular region.

Process

1. Draw a Circle using the circle with centre through point tool.
2. Select the circle, right click and select object properties.
3. Select the colour tab in the object properties window and choose a colour
4. Select the style tab in the object properties window and change the line thickness and filling values.
5. Then explain the three parts described above.

Chord: If you take two points P and Q on a circle, then the line segment PQ is called a chord of the circle. The chord, which passes through the centre of the circle, is called a diameter of the circle. A diameter is the longest chord and all diameters have the same length, which is equal to two times that of the radius .

Process

1. Draw a circle using the circle with centre through point tool.
2. Draw many chords for the circle using the line segment tool that do not pass through the centre of the circle.
3. Draw multiple chords of the circle using the line segment tool that pass through the centre of the circle (Diameter).
4. Draw a line segment that represents the radius of the circle.
5. Then explain the three parts described above.

4.5.2 KTurtle

About Kturtle

Kturtle is a tool to understand basic concepts of programming in computers. The commands are simple and can be visualized by children and hence understood easily. It can be seen as giving instructions to a robot (the turtle) and making the turtle “do what you want it to do”.

Purpose:

Introduce children to the basic idea of programming and the generic logic constructs. Can make the concept of computer programming less intimidating for both teacher and student. In today's digital world, mathematics education may be seen as may areas of learning coming together. These parts are conceptual understanding of the mathematics , using the algorithms to internalize and apply the conceptual understanding pattern recognition and logical reasoning especially to understand theorems and proofs. K Turtle helps teachers build logical reasoning and pattern recognition with children. As it is visual, many geometric properties can also be understood through the use of K Turtle, like making the turtle draw a square requires the child to understand the properties of a square. Thus it is very useful to teach logical reasoning side by side with mathematics. This tool provides a interactive and easy method to do the same with children starting in the upper primary classes.

Activity 1

File:Resource Book for MRP Cascade training html 4f708185.png Open application Applications > Education > Kturtle and introduce the user to the following windows, editor and canvas.

Editor : Space for entering the commands, please note the different colours that are used for keywords (blue) and the quantities (red) etc...

Canvas: Is see the turtle in action when the command being executed.

Now introduce four simple commands reset ,forward, backward, turnleft, turnright

Reset :Clears the canvas and the turtle is positioned in the center of the canvas facing forward.

Forward <Number of pixels) : Turtle moves forward by the number of pixels specified

Backward <Number of pixels) : Turtle moves backward by the number of pixels specified

turnleft <Number of Degrees>: Turtle turns left (anti clockwise) by the number of degrees specified

turnright <Number of Degrees>: Turtle turns right (clockwise) by the number of degrees specified

Note: You can also go to menu option Tools > Direction Chooser.

Type the following commands in the Editor window:

File:Resource Book for MRP Cascade training html m7ea45336.pngReset

forward 100

turnright 90

backward 100

turnleft 90

forward 50

Do the following:

1. Click Save As Save the

Activity 2 : Using the commands from activity 1 create a Square

Reset

Forward 100

Turnright 90

Forward 100

Turnright 90

Forward 100

Turnright 90

Forward 100

Turnright 90

Investigation

Talk about repeated commands and what they think should be done and lead them to the command Repeat <No of Times > { <List of Commands}

Redo Square program as

Reset Repeat 4 { forward 100 turnright 90 }

Activity 3 : Using the commands from activity 1 & 2 discuss how a CIRCLE may be created.

Investigation:

1. What is the definition of a circle really.
2. What is the relationship between the number of times the command is repeated and the command that is within the repeat loop.
3. Can we change the numbers, what happens

Reset Repeat 36 { forward 10 turnright 10 }

Table 1: Circle Program

Activity 4 Bringing some colour to the canvas.

Introduce the following commands , can also go to menu Tools > Color Picker for selecting colour

File:Resource Book for MRP Cascade training html m1444cc7.png

canvascolor <Amount of Red>, <Amount of Green>, <Amount of Blue> : Changes the colour of the canvas

pencolor <Amount of Red>, <Amount of Green>, <Amount of Blue> : Changes the colour of the pen (pencolor 0,0,0 is black)

penwidth <thickness of the pen)

Investigation

Learn the concepts of colour mixing with the primary colours red, green and blue

Activity 5 :

Create a flower or some Rangoli Pattern as shown below or any other pattern they come up with

File:Resource Book for MRP Cascade training html 14df09e5.png

reset canvascolor 255, 115, 119 pencolor 0,0,0 penwidth 3 repeat 4 { turnright 45 forward 200 turnright 45 backward 100 }

reset canvascolor 255, 115, 119 pencolor 0,0,0 penwidth 3 repeat 12 { repeat 36 { forward 10 turnright 10 } turnright 30 }

4.6 Record My Desktop – A tool to record the desktop

• It is a free and open source screen-casting software.
• It is a desktop session recorder for GNU/Linux.

4.6.1 Launching the Application

Note:

If you do not have RecordMyDesktop in Sound & Video, you have to install it using Ubuntu Software Center.

• Go to Applications → Ubuntu Software Center.
• On the top right corner, type “RecordMyDesktop” in the search.
• Click on it and select Install.
• This process shall take some time and upon completion, RecordMyDesktop will appear under Sound & Video.

4.6.2 The Main Window

• Once the application is launched, the main window of RecordMyDesktop appears (as shown in the screen shot).

• On the top-right corner, we can see two scale widgets, labelled as “Video Quality” and “Sound Quality”. These control the quality of the encoded file (bitrate) and not that of capturing.

• Beneath the video and sound quality settings, there is a large button named “Advanced”. Clicking that will bring a new window, that will allow you to set a vast number of options, and fine tune the behaviour of the program.

4.6.3 Advanced Settings

All options in this window are applied when you close it. If you start a recording and the “advanced” window is open, it will close itself and any changes you've made will immediately be applied to your current session.

4.6.4 Using RecordMyDesktop

Upon launching RecordMyDesktop, a small red button appears on the top panel of your desktop using which we can start, pause and stop the recording.

File:Resource Book for MRP Cascade training html m617b546f.png

4.6.5 Start the recording

• To start the recording, click on “Record” in the main window (or) click on the red button and select “record”.
• This will create a window along your desktop border indicating the recording has started.
• File:Resource Book for MRP Cascade training html m7f200d0.pngThe red button will now be like a square button.

• During recording,you can pause the recording by clicking on the red button and selecting “pause”.
• This will pause the recording and there will be two vertical parallel lines on the top panel indicating the recording has been paused.
• To resume the recording again, click on the parallel lines and select “continue recording”.

4.6.6 Stop the recording

• To stop the recording, click on the red button select “stop”.
• This will stop the recording and a new window will appear called “record my desktop encoder”.
• This will take some time and prepare your video to be viewed.

Note:

• Do not press “cancel” when your video is being encoded.
• If you do so, the recording will not be encoded and the video cannot be viewed.

4.6.7 Other Options

4.6.7.1 Show/Hide Main Window

• Click on “Select Window” in the main window (or) click on the red button on top panel and select “Show/hide Main Window”. This will hide the main window of RecordMyDesktop.
• To make the main window visible again, select the same option.

4.6.7.2 Select Area On Screen

• To record a specific area of your screen, select the option “Select Area On Screen”.
• Use your mouse by dragging it to select the area you want to record.

4.6.7.3 About

• Click on the red button on top panel and select “About”.
• A small window will appear giving information about RecordMyDesktop.

4.6.7.4 Quit

• To close the RecordMyDesktop application, click on “quit” in the main window (or) select the “quit” option under the red button options.

5 Installation of Ubuntu

5.1.1 Preface

This section will help you to understand the following:

• What is Edubuntu?
• What are the requirements to setup Edubuntu?
• How to install it?
• How does it work?
• Other configurations on Edubuntu (OpenOffice, Kannada setup etc)

5.1.2 What is Edubuntu?

Edubuntu, is the Ubuntu Education Edition which is designed for use in classroom and schools.

• LTSP - Linux Terminal Server Project (LTSP) is a free and open source add-on package for Linux that allows many people to simultaneously use the same computer.

5.1.3 What are the requirements to setup Edubuntu?

• You will need the Edubuntu 12.04 LTSP DVD (which has been given to you)
• Hardware Requirements – minimum 1GB RAM and 160 GB Hard Disk

5.1.4 How to install Edubuntu?

• Insert DVD in your CD/DVD-ROM device and reboot the computer in order to boot from the CD.
• Note: Hit the F8, F11 or F12 key (depending on your BIOS) to select the CD/DVD-ROM as the first boot device in the boot sequence order.
• The following steps show how to set your DVD as your first boot device:

1. By pressing the DEL or F2 OR F12 key (depending on your BIOS) when your computer is starting you should see something like this.
2. Using the arrow keys select Boot and press enter to access the Boot Device Priority menu.

1. File:Resource Book for MRP Cascade training html m7b424f41.pngPress enter on the highlighted 1st Boot Device and select CD/DVD ROM from the menu.

1. In this BIOS you have to press F10 to save and exit any changes that you have made. Press enter and the changes will be saved and you will exit the BIOS.

'Note: The images shown may vary in your machines. You may not have the exact options, but you will have similar names/menus/options.'

When your computer is starting it will now boot from the CD.

5.1.5 Installation

5.1.5.1 Starting the Installation Process

Insert the selected installation media and start the computer up.

Select the option install - start the installer directly.

We will include screen-shots for the rest of the installation process.

• Use the arrows on the keyboard to select the English language and then press the Enter key.
• In the next step, the following points will be checked –
  • enough space available for the installation – this is important
  • your system is connected to the internet – this is not required
  • your system should be connected to the power source – this is important as the installation can take a long time (as shown below in the screen-shot). Click Forward

5.1.5.2 Edubuntu Options and Partitioning

• On the Disk Setup page, you can choose how Edubuntu should be installed.
• File:Resource Book for MRP Cascade training html 387cb0d3.pngEdubuntu installs a complete operating system to your computer.
• You can choose to install Edubuntu side-by-side with your existing operating system, erase the entire disk and start from scratch. The preferred option would be to choose the option Install them side-by-side, choosing between them each start-up. Click Forward.

After this step, the installation begins. Few more steps have to completed, as shown below.

Note – The order of the following steps may vary during the installation in your machines.

Select your time zone

In the next step, you will be presented with a world map. Select the India map by clicking on it. Click Forward.

File:Resource Book for MRP Cascade training html 2e3c45d1.png

5.1.5.3 Select your keyboard layout

• File:Resource Book for MRP Cascade training html 7be11ea6.pngIn this step, you have to choose the keyboard layout. The default keyboard layout is USA and it is selected by default in this step as shown below.
• Click Forward (Default Keyboard Layout - USA).
• Click on Forward.

• This will install Edubuntu along side Windows and you will be able to use both the operating systems without any loss of data.

5.1.5.4 Enter User Details

• File:Resource Book for MRP Cascade training html m6455b633.pngIn the user setup dialog, you will be requested to set up the administrator user on the system.
• The user name cannot start with a number, and must be lowercase letters only.
• If you make mistakes, the installer will warn you about it. It is recommended that you require a password to log in to the system.

5.1.5.5 Installation Complete

• After the installation is complete, click on Restart Now

• Restart your system now and your DVD tray will open automatically.
• Remove the DVD and press ''Enter''.

Your server machine with Edubuntu, version 12.04 is now ready for use. You can proceed to install the educational tools on the server given on another CD

5.1.5.6 Additional Settings after Installation

• The tool PhET is already installed on your system now. To add it to the menu
• Click on Applications → System Tools → Preferences → Main Menu. On the left hand box, select education or science menu and click on the New Item button. In the box that appears
• Type

5.2 FAQ

Please visit [[10]] . There are also FAQ's in Kannada on this website.